A New Optical-based Hydrogen Sensor is more Perceptive to Eliminate Risk of Sparking

A New Optical-based Hydrogen Sensor is more Perceptive to Eliminate Risk of Sparking

Hydrogen, as a clean, renewable alternative to fossil fuels, is an essential component of a sustainable energy future, and it is already here. However, lingering concerns about flammability have limited the widespread use of hydrogen as a power source for electric vehicles. Previous advances have reduced the risk, but new research from the University of Georgia has put that risk in the rearview mirror.

Hydrogen vehicles can refuel much faster and travel much further without needing to refuel than today’s electric vehicles, which run on battery power. However, securing a safe method for detecting hydrogen leaks is one of the final hurdles to hydrogen power. One of the hot topics in hydrogen technology and safety is remote detection of hydrogen without the use of electronic components or elevated temperatures.

A new study published in Nature Communications describes a low-cost, spark-free optical-based hydrogen sensor that is more sensitive – and faster – than previous models.

A new study documents an inexpensive, spark-free, optical-based hydrogen sensor that is more sensitive – and faster – than previous models.

“Right now, most commercial hydrogen sensors detect a change in an electronic signal in active materials upon interaction with hydrogen gas, which can potentially induce hydrogen gas ignition by electrical sparking,” said Tho Nguyen, associate professor of physics in the Franklin College of Arts and Sciences and project co-principal investigator. “Our spark-free optical-based hydrogen sensors detect the presence of hydrogen without the use of electronics, making the process significantly safer.”

The role of renewable energy sources is becoming increasingly important as the global climate changes. Hydrogen has the potential to be an important energy carrier in the transition away from fossil fuels. However, in order to ensure safe operations, a highly reliable and sensitive hydrogen sensor for leak detection is required.

Hydrogen gas is in high demand in the industrial and commercial sectors as a clean and sustainable energy source. As a result, rapid and precise detection of hydrogen gas is becoming increasingly important for the safe production and operation of hydrogen.

A-New-Optical-based-Hydrogen-Sensor-is-more-Perceptive-to-Eliminate-Risk-of-Sparking-1
New optical hydrogen sensors eliminate risk of sparking

Not just for cars

Hydrogen power can be used for much more than just powering electric vehicles, and flammability mitigation technologies are critical. Robust sensors for hydrogen leak detection and concentration control are required at all stages of the hydrogen economy, including production, distribution, storage, and utilization in petroleum processing and production, fertilizer, metallurgical applications, electronics, environmental sciences, and health and safety-related fields.

Response time, sensitivity, and cost are the three major issues with hydrogen sensors. The current mainstream technology for H2 optical sensors necessitates the use of an expensive monochromator to record a spectrum, which is then analyzed using a spectral shift comparison.

“With our intensity-based optical nanosensors, we go from detection of hydrogen at around 100 parts-per-million to detection of hydrogen at around 2 parts-per-million at a cost of a few dollars for a sensing chip,” Tho explained. “Our response time of.8 seconds is 20% faster than the best available optical device currently reported in the literature.”

How it works

The new optical device is based on the nanofabrication of a nanosphere template that is covered with a Palladium Cobalt alloy layer. Any hydrogen present is quickly absorbed, and an LED detects it. The intensity of the light transmitted is recorded by a silicon detector.

“All metals absorb hydrogen, but we were able to set a new benchmark for how fast and sensitive these sensors can be by finding the suitable elements with the right balance in the alloy and engineering the nanostructure to amplify subtle changes in light transmission after hydrogen absorption,” said George Larsen, a senior scientist at Savannah River National Laboratory and co-principal investigator. “All while keeping the sensor platform as straightforward as possible.”

The U.S. Department of Energy and the SRNL’s Laboratory Directed Research and Development Program are the primary funding sources for the research.

Share This Post